主调音台有56个推子（24-8-4），辅调音台有24个推子（8-8-8）。它们各有240个DSP通道和一个外挂服务器。一台Lawo Nova73 HD矩阵支持中央矩阵及作为此调音台内核的DSP，这提供51个MADI端口且有8000倍8000交叉点的矩阵容量。由于这是一间新闻控制室，电源和矩阵板都为冗余配置。接口箱装有冗余MADI板和布线。Nova73 HD和调音台之间的5个Netlin-MADI交叉链接也是冗余设计。

Control Surface

• Frame sizes from 16 + 8 faders to 96 + 16 faders
• Separate frames with 8, 16 and 24 faders
• 6 banks per 2 layers
• 100 mm faders + 4 rotary controls with free assignment + Input Gain controller
• Channel Display on every fader, with touch-sensitive selection
• TFT metering in mono, stereo or up to 7.1, including bus-assignment, dynamics gain reduction, AfV status, VCA assignment, surround master assignment
• External display of GUI pages, eg. metering
• Fader colour coding, settable via snapshot
• Fader notch and PFL overpress
• 9 user buttons
• Optional: up to three user panels can be integrated (machine control, theatre functions, automation, 40 / 80 buttons) talkback, script tray, PPM-integration, 2 RU 19” integration 
• Extra Faders Option *: additional 8 faders, Short-Control Fader Panel in the central control section; dedicated Reveal area. (*supported with V4.14 SW Release, orders are accepted)

Signal Processing

• 888 channels and 144 summing buses, 40-bit floating point
• Up to 760 inputs with A/B input, up to 64 subgroups, 32 aux sends, up to 96 track buses, up to 48 main sums
• Quick change of channel and bus to mono / stereo / surround
• Up to 96 surround channels, 128 VCA groups with metering, 256 GP channels
• Surround formats: DTS / Dolby ® Digital 5.1, Dolby ® Pro-logic 4.0, DTS ES / Dolby ® EX 6.1, SDDS 7.1, DTS-HD 7.1, diverse panning characteristics, surround aux bus
• Loudness metering: full integration in mc² mixing consoles - see below
• AMBIT: conversion of stereo signals to surround sound
• 2 AFL: 1 surround 8-channel, 1 stereo
• 2 PFL stereo
• Audio-follow-Video with 128 events; controlled either via RemoteMNOPL, GPI or matrix connection, envelope adjustable up to 10s fade time
• Solo In Place
• Permanent meter point on the fader, selectable to INPUT,
• PF, AF, DIROUT on the Channel Display
• Modules: INMIX with MS-Decoder, Digital Amp, 2-band fully parametric filter, 4-band fully parametric EQ, 2-band fully parametric side chain filter, insert, delay up to 1800 ms (units in metres, milliseconds, frames); 4 independent dynamics (Expander, Gate, Compressor, Limiter), Image, Meter, Direct Out
• In-line configuration with send / return switching — on the channel or global
• Fully equipped surround channel with coupling of all channel parameters and Hyper Panning

Routing Matrix

• Up to 8192 crosspoints, non-blocking
• 96 kHz, 24-bit
• Fully redundant signal path
• Level adjustment of all inputs and outputs
• Downsizing from up to 7.1 to stereo
• Integrated monitoring devices for remote locations, e. g. director’s room
• Full networking of up to 16 HD Cores, share and import from sources and destinations, studio intervention
• Full snapshot and production data portability independent of matrix and DSP size
• Level control for every input and output

Loudness Metering *

• Full integration of loudness metering complying with ITU-R BS.1770
• Compatible with international recommendations like EBU R128 and ATSC A/85
• International recommendations are stored as preset, they can be adapted anytime
• Available in any channel strip
• Different visualisations can be defined per channel:
  • Classical peak meter
  • Loudness meter
  • Combination of peak and loudness meter displays true peak and loudness complying with ITU-R BS.1770
• Long-term measurement in all summing channels
• Exposed display of the measured values in the GUI header
• Absolute and relative visualisation of the scales and measured values
• EBU +9, EBU +18 and ITU-R BS.1771 scales
• True peak metering complying with ITU-R BS.1770 displays true peak values
• The time slots Momentary (400ms) and Short-Term (3s) can be defined individually for all input and summing channels
• Using additional LFE measuring and selectable gating settings prepared for future norms

(*available with V4.14 SW Release)

Plug-in Server

• Full VST plug-in integration with storage of plug-in parameters in snapshots and production data

Static and Dynamic Automation

• Snapshot automation, multiple sequences with trim and fade
• Dynamic TC-based automation, recording by parameter, recording of all modules in a channel including bus assign, writing in “stop” mode, touch, glide, join, punch in / out
• Trim including “on the fly” mode
• TC-Cut editing (copy, paste, delete, cut, insert, etc.)

I / O

• Mic / Line with up to 127dB dynamic range, subsonic filter 40, 80, 140 Hz
• Line out
• ADAT ® (ADAT 7.1 is a registered trade mark of Alesis, LLC and is used here under licence)
• AES with input and output SRC, transparent Dolby ® E routing, balanced and unbalanced
• HD-SDI with up to 270 ms onboard delay, MADI 64 and 56 with fibre or coax, ATM, GPIO, serial, MIDI
• Direct intercom connection
• All interfaces at 24-bit, 96 kHz (for details see DALLIS product information)
• Monitoring systems for stereo and surround

Synchronisation

• 2 redundant inputs with automatic detection of Blackburst, Wordclock, AES3, MADI

Redundancy

• PSUs, DSP board, router board
• Fully redundant signal path
• Redundant control system, exchangeable during run time; full data redundancy PSU for control system and control surface

Control

• Bay-Iso with separate layer and bank switching, plus second PFL / AFL bus
• Global A / B input switching
• Enhanced mix-minus control with independent off-air conference
• Direct out mute by fader
• Mix-minus self monitoring
• IT (IS) summation
• Fader control of all level parameters
• Diverse tally and fader start modes
• Program switch
• Machine control
• Audio-follow-Video up to 128 camera tallies,
• Ethernet or GPI controlled
• Extensive talkback system integration
• Camera mic remote via GPI or voltage control
• Remote desktop access from TFT to external computer

Remote Maintenance

• Remote connection via Internet software
• Remote software updates, error diagnostics
• mxGUI: remote control of console via laptop

External Control Systems

• Remote control of all routing parameters via network
• Remote control of monitoring units in remote locations
• Remote control of integrated matrix monitoring units
• Remote control of signal parameters such as SDI, silence detects, mic gain and more (for details see the Remote MNOPL protocol documentation)
• Online configuration with AdminHD, graphic configuration of HD Core components
• External matrix controllers: BFE, VSM, Evertz, Miranda, Sony, and others
• iPhone App